We are Riddhi Siddhi Impex, a Mumbai-based Nickel 200 Strips manufacturer, supplier, and exporter, established in 2002. We slit commercially pure nickel strip to ASTM B162 / ASME SB-162 in thicknesses from 0.03 mm to 5 mm. Our ISO 9001, 14001, and 45001-certified firm carries ready stock, a monthly supply capacity of 400-500 tonnes, and EN 10204 Type 3.1 / 3.2 certificates available on request.
Nickel 200 strips are narrow, flat-rolled strips of commercially pure wrought nickel, slit from nickel coil. The grade holds 99.0% minimum nickel plus cobalt, melts between 1435 and 1446 °C, and stays ferromagnetic at room temperature. UNS N02200 strip resists caustic alkalis and reducing acids, while its 0.15% maximum carbon caps continuous service near 315 °C, where graphitisation embrittles the metal. These Nickel Strips are used in food processing units and electronic equipment.
As a reputed Nickel 200 strip supplier and manufacturer, we produce every Alloy 200 strip on our own slitting lines rather than trading pre-cut widths. Material ships annealed soft to ASTM B162, or AMS 5553 for aerospace, in any width from 3 mm to 2000 mm, with your choice of finish and edge.
We provide ASTM B162 Nickel 200 winding strip in annealed soft condition, hot rolled or cold rolled, precision slit from ready Mumbai stock with five surface finishes and four edge options.
| Parameter | Details |
|---|---|
| Standard | ASTM B162 / ASME SB-162, AMS 5553 |
| Thickness | 0.03 mm to 5 mm |
| Width | 3 mm to 2000 mm |
| Width Tolerance | ±0.1 mm |
| Condition | Annealed (Soft) |
| Supply Forms | Hot rolled and Cold rolled |
| Surface Finish | BA (Bright Annealed), 2B, Scotch-Brite, Matte, Matte PVC |
| Edge | Slit edge, Mill edge, Deburred edge, Round edge |
ASTM B162 demands 99.0% minimum nickel plus cobalt in UNS N02200 strip, and its 0.15% carbon limit sets the 315 °C service ceiling.
| Element | Composition (%) |
|---|---|
| Nickel + Cobalt (Ni + Co) | 99.0 min |
| Carbon (C) | 0.15 max |
| Manganese (Mn) | 0.35 max |
| Iron (Fe) | 0.40 max |
| Silicon (Si) | 0.35 max |
| Copper (Cu) | 0.25 max |
| Sulphur (S) | 0.010 max |
Annealed Ni 200 strip pairs a 380 MPa minimum tensile strength with 40% elongation, so it bends, draws, and spins without cracking. Figures for gauges under 1.59 mm remain indicative.
| Property | Value (Annealed) |
|---|---|
|
Tensile Strength, minimum
|
380 MPa (55 ksi) |
|
Yield Strength (0.2% offset), minimum
|
105 MPa (15 ksi) |
|
Elongation in 50 mm, minimum
|
40% |
Buyers working to a European or Asian specification can match the W.Nr 2.4066 strip we slit against each designation below. Every listing names the same commercially pure nickel.
| Country / Standard | Designation |
|---|---|
| USA (UNS) | N02200 |
| Europe (EN) | 2.4066 |
| Germany (W.Nr) | 2.4066 |
| Japan (JIS) | NW2200 |
| UK (BS) | NA 11 |
| China (GB) | N6 |
| Russia (GOST) | НП2 |
These 4 industries use most of the Nickel 200 strips leaving our lines. Each buys the grade for purity, conductivity, or alkali resistance rather than raw structural strength.
Caustic plants wind Alloy 200 strip into heating elements, evaporator internals, and vessel linings, handling sodium hydroxide at every concentration. Stainless steel cracks in hot caustic; commercially pure nickel does not, and the strip keeps a clean surface through years of continuous exposure below 315 °C.
Battery assemblers spot-weld Nickel 200 slitting coil into cell tabs, busbars, and terminal connectors, where electrical conductivity above most nickel alloys trims resistive losses. Transducer and sensor builders draw on the same strip for its magnetostrictive response, turning magnetic fields into precise mechanical movement.
Dairy, beverage, and pharmaceutical fabricators use commercially pure nickel strips in product-contact hardware because the metal sheds no contaminating ions into the process stream. Hot alkaline clean-in-place chemistry passes without attack, so sieve frames, dosing parts, and sealing components keep their dimensions through repeated washdowns.
Aerospace shops order Nickel 200 strip to AMS 5553 for instrument parts, sealing elements, and battery hardware that need chemical stability more than strength. Full traceability travels with every slit coil, since we issue EN 10204 Type 3.1 / 3.2 certification against the aerospace specification on request.
Every order leaves from our Mumbai and Taloja warehouses packed in wooden cases or on pallets for sea movement.
| Parameter | Details |
|---|---|
| Packaging | Wooden cases, pallet packing |
| Incoterms | FOB, CIF, CFR, EXW Mumbai |
| Dispatch Points | Mumbai and Taloja warehouses |
| Standard Lead Time | 4 to 5 days |
| Urgent Dispatch | 2 to 3 days |
| Payment Terms | Advance, credit, LC |
| Certification | EN 10204 Type 3.1 / 3.2 on request |
Nickel 200 Strips price in India runs around ₹2,500 to ₹3,000 per kg, roughly $29 to $36 for export buyers. LME nickel sets the base figure, while thickness, width, finish, edge, and quantity settle the final rate. The range is indicative, so phone or WhatsApp our team for a firm quote.
We slit pure Nickel 200 strips from 0.03 mm to 5 mm thick and to any width between 3 mm and 2000 mm, held to ±0.1 mm.
Nickel 200 strips are covered by ASTM B162 and ASME SB-162, which specify commercially pure nickel plate, sheet, and strip. AMS 5553 applies when an aerospace order calls for it.
Yes, Nickel 200 strip is ferromagnetic and holds that behaviour up to its Curie temperature of 353 °C, which suits relay, sensor, and magnetic shielding work.
The maximum service temperature for Nickel 200 strip coil is about 315 °C. Beyond that point, carbon precipitates as graphite along grain boundaries and the metal loses ductility.
The main difference between Nickel 200 and Nickel 201 strips is carbon. UNS N02200 allows up to 0.15%, while Nickel 201 caps it at 0.02%, letting 201 serve above 315 °C where Nickel 200 would graphitise.
You can source Nickel 200 strips in India from us at Riddhi Siddhi Impex. We have a ready stock of UNS N02200 strip at our Mumbai warehouse for dispatch. We are a manufacturer, supplier and exporter and cater to buyers all over India and abroad. Call us or WhatsApp us and we'll give you a quote in 24 hours.
